|
Post by riverrat on Feb 17, 2011 10:52:48 GMT -5
I have my first reproduction of a gar that I am working on. Any suggestions on creating teeth?
|
|
|
Post by jscanlan1 on Feb 23, 2011 20:43:49 GMT -5
I don't know what type of gar you are working on, but from looking at pictures Don. I would drill small holes to insert wires in. I would then glue the wires in, and cut to length (Like 25 or 26ga wire). I would then use thicken fiberglass resin to pull a tooth up around the wire. To just pull up a tooth with resin would be too fragile for a gar, their teeth are long, that what I am thinking.
|
|
|
Post by cecil on Apr 13, 2011 21:45:27 GMT -5
Remove the pallet with the teeth from a real fish and glue the pallet in. ;D
|
|