|
|
Post by trkyman on Sept 23, 2006 11:20:10 GMT -5
What kind of glue do you all use for gluing the teeth back in a skull? Also I need to glue the lower jaw back in too. Thanks for any help,
Nina
|
|
andyb
Trophy Hunter
2 bucks
Posts: 703
|
Post by andyb on Sept 23, 2006 11:54:50 GMT -5
super glue
|
|
|
|
Post by jwj4856 on Sept 23, 2006 11:55:57 GMT -5
I always use super glue, sets fast and drys clear.
|
|
|
|
Post by trkyman on Sept 23, 2006 12:52:15 GMT -5
Thank you for the replies....I will have to go buy some
|
|
|
|
Post by riverrat on Sept 23, 2006 22:56:02 GMT -5
I use a product called Tech Bond Black (thick Viscosity), it works like super glue but not quite as fast and I think a 2oz. bottle is a lot cheaper. I use it for everything lips, eyes, Artificial heads, Etc. I don't pore it from the bottle (the Tip glues itself) I dip a scrap wire in the bottle and it only takes a drop.
|
|
|
|
Post by trkyman on Sept 24, 2006 7:47:35 GMT -5
Where do you buy that glue riverrat?
|
|
|
|
Post by riverrat on Sept 24, 2006 10:25:11 GMT -5
I know Dan Rinehart, Van Dikes, Waco, most of your suppliers have it just have to check for price. I would not get a bottle larger than 2oz it goes a long way.
|
|
|
|
Post by trkyman on Sept 24, 2006 19:14:49 GMT -5
I was replacing the fletching on some extra arrows today, and just for kicks, I used the fletching glue I bought to glue the teeth in my raccoon skull. It took a while to set, but it is clear and durable and worked good. I wouldn't keep using it though, it was just a quick fix.
|
|
|
|
Post by circleh on Sept 25, 2006 9:01:21 GMT -5
I was told once to use elmers glue. I have tried to use it and it seems to work good. it dries clear and is easier to clean up then some of the other glues.
|
|
|
|
Post by trkyman on Sept 25, 2006 18:43:06 GMT -5
I tried that once to glue the teth back in a muskrat skull, worked pretty good but this time I was out of elmer's glue lol
|
|
|
|
Post by circleh on Sept 25, 2006 22:01:10 GMT -5
Always happens when you need it. lol
|
|
|
|
Post by riverrat on Sept 26, 2006 4:51:29 GMT -5
The problem with Elmer's glue is the time it takes to set. Fletch tight and crazy glue work but both of them are a little on the runnier side. Teck bond thick viscosity dries quick and when you put a drop on something it is similar to a drop of Elmer's glue
|
|
|
|
Post by circleh on Sept 26, 2006 10:27:13 GMT -5
I'll have to give that a try next time.
|
|
|
|
Post by jwj4856 on Sept 26, 2006 12:10:16 GMT -5
if you use the super glue gel as it is thick and much the same as the tech bond.
|
|
wolfwoman
Spike
Want to become healthy?
Posts: 67
|
Post by wolfwoman on Jan 23, 2008 0:22:28 GMT -5
If you put the teeth back in while the skull is still wet right out of the peroxide and use Elmer's, by the time the skull is done drying the Elmer's is long done drying too. If you EVER need to get those teeth out again, with Elmer's you can just soak the skull in warm water for awhile and it dissolves.
|
|
? Looking for a wayto fix broken fins on already mounted fish...And how to blend the color to match the fish already painted??? need some help please!!!!!
Sept 13, 2014 21:11:16 GMT -5
? Looking for a wayto fix broken fins on already mounted fish...And how to blend the color to match the fish already painted??? need some help please!!!!!
Sept 13, 2014 21:11:16 GMT -5